Publishers of technology books, eBooks, and videos for creative people

Home > Articles

📄 Contents

␡
  1. Chapter Objectives
  2. Chapter Objectives
  3. EXERCISE 3-1 Drawing a Rectangular Conference Room, Including Furniture
  4. EXERCISE 3-1 Drawing a Rectangular Conference Room, Including Furniture
  5. Making a Drawing Template
  6. Making a Drawing Template
  7. Polyline
  8. Polyline
  9. OFFSET
  10. OFFSET
  11. EXPLODE
  12. EXPLODE
  13. ID Point
  14. ID Point
  15. TRIM
  16. TRIM
  17. Rectangle
  18. Rectangle
  19. CHAMFER
  20. CHAMFER
  21. FILLET
  22. FILLET
  23. COPY and Osnap-Midpoint
  24. COPY and Osnap-Midpoint
  25. ROTATE
  26. ROTATE
  27. POINT
  28. POINT
  29. DIVIDE
  30. DIVIDE
  31. MEASURE
  32. MEASURE
  33. OSNAP
  34. OSNAP
  35. MIRROR
  36. MIRROR
  37. Osnap Modes That Snap to Specific Drawing Features
  38. Osnap Modes That Snap to Specific Drawing Features
  39. Running Osnap Modes
  40. Running Osnap Modes
  41. Osnap Settings: Marker, Aperture, Magnet, Tooltip
  42. Osnap Settings: Marker, Aperture, Magnet, Tooltip
  43. EXERCISE 3-2 Drawing a Rectangular Lecture Room, Including Furniture
  44. EXERCISE 3-2 Drawing a Rectangular Lecture Room, Including Furniture
  45. Making Solid Walls Using Polyline and Solid Hatch
  46. Making Solid Walls Using Polyline and Solid Hatch
  47. From
  48. From
  49. BREAK
  50. BREAK
  51. Polyline Edit
  52. Polyline Edit
  53. HATCH
  54. HATCH
  55. ARRAY
  56. ARRAY
  57. ARRAYEDIT
  58. ARRAYEDIT
  59. Distance
  60. Distance
  61. Exercise 3-3 Drawing a Curved Conference Room, Including Furniture
  62. Exercise 3-3 Drawing a Curved Conference Room, Including Furniture
  63. Polyline
  64. Polyline
  65. POLYGON
  66. POLYGON
  67. Grips—Add Vertex
  68. Grips—Add Vertex
  69. Grips—Convert to Arc
  70. Grips—Convert to Arc
  71. ARRAY
  72. ARRAY
  73. Exercise 3-4 Drawing a Conference Room Using Polar Tracking
  74. Exercise 3-4 Drawing a Conference Room Using Polar Tracking
  75. Polar Tracking
  76. Polar Tracking
  77. Polyline Edit
  78. Polyline Edit
  79. Specifying Points with Tracking
  80. Specifying Points with Tracking
  81. Drawing the Chairs around the Conference Table
  82. Drawing the Chairs around the Conference Table
  83. Completing the Conference Room
  84. Completing the Conference Room
  85. Using Command Preview
  86. Using Command Preview
  87. Choosing Selection Options
  88. Choosing Selection Options
This chapter is from the book

This chapter is from the book

AutoCAD 2022 for Interior Design and Space PlanningAutoCAD 2022 for Interior Design and Space Planning

Learn More Buy

This chapter is from the book

This chapter is from the book

AutoCAD 2022 for Interior Design and Space PlanningAutoCAD 2022 for Interior Design and Space Planning

Learn More Buy

Using Command Preview

Command preview, in the Preview area of the Selection tab of the Options dialog box (Figure 3-55), enables you to preview the results of Trim, Extend, Lengthen, Break, and MatchProp operations before actually selecting the objects. The command also enables you to preview Fillet, Chamfer, and Offset operations.

For example, the Trim and Extend tools provide a preview of the results before you commit the selection. After you select the cutting or boundary edges, you simply pass the cursor over the object you want to trim or extend. A preview of the resulting object is displayed. When you are trimming, the segment to be removed is dimly displayed, and a cursor badge indicates that it will be deleted.

Figure 3-55

Figure 3-55 Options dialog box, Selection tab – Command preview option

Peachpit Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Peachpit and its family of brands. I can unsubscribe at any time.